Trusted ac repair for Milford properties. Same-day service available, transparent pricing, and a workmanship guarantee.
When your air conditioner in Milford, New Hampshire blows warm air, short cycles, or fails to start, KIC Refrigeration technicians identify the exact cause through systematic testing of the refrigerant circuit, compressor windings, capacitors, and control board. We restore reliable cooling performance with precision repairs that address the root problem, not just the symptoms.
Whether you own a single-family home or manage a commercial property in Milford, professional ac repair is essential for maintaining safe, efficient indoor climate control. KIC Refrigeration has completed hundreds of ac repair projects across New Hampshire, and our Milford customers benefit from that depth of experience, our fully stocked service vehicles, and our ability to respond the same day for urgent situations.
We understand that ac repair can feel like a major decision. That is why KIC Refrigeration makes the process simple for Milford property owners — free evaluations, transparent pricing, flexible scheduling, and a dedicated point of contact from diagnosis through completion. Your satisfaction is guaranteed.
How our NATE-certified technicians deliver quality ac repair results from start to finish.
We assess your air conditioning problem — no cooling, weak airflow, strange noises, ice buildup, or short cycling — and perform a safety check on electrical connections, circuit breaker, disconnect, and thermostat wiring before beginning hands-on diagnostics.
KIC Refrigeration diagnoses AC failures in Milford, NH with precision electrical and refrigerant testing. We check capacitors within 6 percent of rated microfarads, measure contactor coil resistance, verify compressor winding resistance for shorts and opens, and test the refrigerant circuit — comparing suction pressure, discharge pressure, subcooling, and superheat to the manufacturer target values for the current outdoor ambient temperature.
Our Milford technician replaces the failed part with the correct replacement for your unit make, model, and tonnage. If the failure involves the sealed refrigerant system, we recover the charge, make the repair, pressure test with nitrogen, evacuate to below 500 microns, and weigh in the correct charge of R-410A or the specified refrigerant.
We run the system for a minimum of 15 minutes, measure the temperature split across the evaporator coil (target: 16 to 22 degrees), verify suction and discharge pressures, check condenser fan and blower motor amperage, and confirm the thermostat cycles the system off at setpoint.
Get answers to the ac repair questions our customers ask most often.
AC repair in Milford typically costs $150 to $500 for common component failures including run capacitors ($150 to $250), contactors ($150 to $350), condenser fan motors ($250 to $500), and blower motors ($300 to $600). Compressor replacement is the most expensive repair at $1,500 to $3,500 depending on unit tonnage and whether the system uses R-410A or older R-22 refrigerant. Evaporator coil replacement runs $800 to $2,500 including the refrigerant recovery and recharge. KIC Refrigeration provides a detailed written estimate with itemized parts and labor costs before beginning any AC repair at your Milford property so there are no surprises on the invoice.
The industry guideline is to repair if the unit is under 10 years old and the repair costs less than 50 percent of a new system. AC units over 15 years old — especially those running R-22 refrigerant — are almost always better replaced. R-22 has been phased out of production and the remaining supply costs $80 to $150 per pound, making even minor refrigerant leaks prohibitively expensive to fix. A new 16 SEER2 system uses approximately 38 percent less energy than a 10 SEER unit, and many qualify for the federal energy tax credit. KIC Refrigeration helps Milford homeowners evaluate repair versus replacement based on equipment age, repair history, refrigerant type, and projected energy savings.
AC refrigerant recharge in Milford costs $200 to $500 for R-410A systems at roughly $50 to $80 per pound, and $400 to $1,200 for older R-22 systems at $80 to $150 per pound due to the phaseout-driven supply shortage. However, simply adding refrigerant without finding the leak is a temporary and wasteful fix — the charge will leak out again in weeks or months and you will be back in the same situation. KIC Refrigeration always locates the leak first using electronic leak detectors and UV dye, repairs the leaking component, evacuates the system to remove moisture and air, and recharges by weight to the manufacturer specification. This approach fixes the problem permanently.
An AC that runs but produces little or no cooling is most commonly caused by low refrigerant charge from a leak, which reduces the suction pressure and causes the evaporator coil temperature to drop below 32 degrees, forming ice that blocks airflow completely. Other causes include a dirty condenser coil that cannot reject heat, a failed compressor that runs but does not pump refrigerant, a stuck or failed metering device — either a TXV or fixed orifice — that restricts refrigerant flow, or a blower motor running at reduced speed due to a failing capacitor. KIC Refrigeration connects manifold gauges at your Milford home and measures suction pressure, discharge pressure, superheat, and subcooling to diagnose the exact cause.
Hear from property owners who chose us for their heating and cooling needs.
"KIC Refrigeration cleaned our dryer vent and also noticed our exhaust duct was damaged. Fixed both on the same visit. That kind of attention to detail matters."
"Furnace tune-up was straightforward and the technician was friendly. Gave some tips on filter replacement schedules which was helpful."
"KIC Refrigeration did a full HVAC inspection before we closed on our new house. Very detailed report and the inspector answered all my questions patiently."